Course List

Boom type EWP 11m or more (Logbook)

WPLB


Boom type EWP 11m or more (Logbook)This course commences with a full day training session specifying the skills and knowledge required to safely operate a boom-type elevating work platform (EWP) where the length of the boom is 11 metres or more.

Boom type EWP 11m or more (Work Ready)

WPWR


Boom type EWP 11m or more (Work Ready) This course commences with a full day training session specifying the skills and knowledge required to safely operate a boom-type elevating work platform (EWP) where the length of the boom is 11 metres or more.

Enter and work in confined spaces

CSE


Confined Space CSQ This unit is a necessary qualification for those working in roles where they are required to perform work within a confined space. Training consists of face-to-face classroom theory sessions followed by hands-on practical training.

Enter and work in confined spaces_Refresher

CSE_Refresher


Confined Spaces Refresher. This unit is a necessary qualification for those working in roles where they are required to perform work within a confined space. Training consists of face-to-face classroom theory sessions followed by hands-on practical training. Evidence of previous CSE course required to enrol for the refresher.


 

Heights Rescue

HR



Heights Rescue - This course commences with a half day of training, which covers the use of rescue equipment for working at heights.




 

Licence to operate Forklift (Logbook)

LFLB


Forklift (Logbook)This course commences with a full day training session specifying the skills and knowledge required to operate a forklift truck safely.Workplace training is to be recorded in a logbook. An individual’s hours will vary, pending an individual’s skills-assessment during training and are determined by an accredited high-risk licensing assessor.
 ;

Licence to operate Forklift (Workready)

LFWR


Forklift (Workready) This course specifies the skills and knowledge required to operate a forklift truck safely. A forklift truck is a powered industrial truck equipped with lifting media made up of a mast and an elevating load carriage to which is attached a pair of fork arms or other arms that can be raised 900 mm or more above the ground but does not include a pedestrian-operated truck or a pallet truck.

Licence to perform dogging (Logbook)

DGLB


Dogging (Logbook)This course specifies the outcomes required to perform slinging techniques, including the selection and inspection of lifting gear and/or the directing of the crane operator in the movement of the load when the load is out of view of the crane/ operator for licencing purposes. 

Licence to perform dogging (Workready)

DGWR


Dogging (WorkReady) This course specifies the outcomes required to perform slinging techniques, including the selection and inspection of lifting gear and/or the directing of the crane operator in the movement of the load when the load is out of view of the crane/ operator for licencing purposes. 

Licence to perform Rigging Basic level (Logbook)

RGLB


Rigging Basic Level (Logbook) This unit requires to perform basic rigging work associated with movement of plant and equipment, steel erections, hoists, placement of pre-cast concrete, safety nets and static lines, perimeter safety screens and shutters; and cantilever crane loading platforms.

Licence to perform Rigging Basic level (Workready)

RGWR


Rigging basic level (Work ready) This unit specifies the outcomes required to perform basic rigging work associated with movement of plant and equipment, steel erections, hoists, placement of pre-cast concrete, safety nets and static lines, perimeter safety screens and shutters; and cantilever crane loading platforms for licensing purposes.

Licence to perform Rigging Intermediate (Workready)

RIWR


Rigging Intermediate level (Workready) This unit specifies the outcomes required to perform rigging work at the intermediate level, which includes all the outcomes for rigging work at the basic level, and also includes rigging of cranes, rigging of conveyors, rigging of dredges and excavators, rigging associated with tilt slabs, rigging associated with demolition work, and dual lifts for licensing purposes. 

Licence to perform Rigging Intermediate level(Logbook)

RILB


Rigging Intermediate Level (Logbook) This unit specifies the outcomes required to perform rigging work at the intermediate level, which includes all the outcomes for rigging work at the basic level, and also includes rigging of cranes, rigging of conveyors, rigging of dredges and excavators, rigging associated with tilt slabs, rigging associated with demolition work, and dual lifts for licensing purposes.

Non-slewing mobile crane (greater than 3T) (Logbook)

CNLB


Non-slewing mobile crane (< 3t capacity) This unit specifies the skills and knowledge required to operate a non-slewing mobile crane with a Maximum Rated Capacity (MRC) exceeding 3 tonnes safely.

Prepare to work safely in the construction industry (WhiteCard)

WC

Prepare to work safely in the construction industry This unit specifies the mandatory work health and safety training required prior to undertaking construction work.

Slewing mobile crane (60t) (Logbook)

C6LB


Slewing mobile crane (over 60t) (logbook) This unit specifies the skills and knowledge required to safely operate a slewing mobile crane with a Maximum Rated Capacity (MRC) up to 60 tonne

Slewing mobile crane (over 100T) (logbook)

COLB


Slewing mobile crane (over 100t) (logbook)This course commences with 2 full-day training sessions specifying the skills and knowledge required to operate slewing mobile crane with a maximum rated capacity (MRC) over 100 tonnes safely.

Slewing mobile crane (up to 100t) (logbook)

C1LB


Slewing mobile crane (up to 100t) (logbook)This course commences with 2 full-day training sessions specifying the skills and knowledge required to operate slewing mobile crane with a maximum rated capacity (MRC) up to 100 tonnes safely.

Slewing mobile crane (up to 20t) (Logbook)

C2LB


Slewing mobile crane (up to 20t) (Logbook)This course commences with 2 full-day training sessions specifying the skills and knowledge required to operate slewing mobile crane with a maximum rated capacity (MRC) up to 20 tonnes safely.

Working safely at heights

WAH



Working Safely at heights This unit offers a comprehensive introduction to safe work at heights, maintaining safety at work, performing work at heights, an understanding of the hierarchy of prevention of falls and clean up requirements. 

Working safely at heights Refresher

WAH


Working Safely at heights Refresher. This unit offers a comprehensive introduction to safe work at heights, maintaining safety at work, performing work at heights, an understanding of the hierarchy of prevention of falls and clean up requirements.